Skip to main content

Unable to detect SwellSync monitor

If you are unable to see the SwellSync monitor for pairing in Bluetooth scans, it is probably because the monitor is asleep.  The SwellSync monitor will auto-sleeps after 3 minutes if there are no devices connected via Bluetooth or web browser.

When the unit is asleep, it will wake when it detects the flywheel spinning - so give your erg a tug before you are ready to pair. 

To check the current status of the SwellSync monitor, look inside the charging opening for LED lights:

  • Blue light means the unit is awake; no blue light means the unit is sleeping.
  • Red light means the unit is recharging.